Methods And Steps For Selecting Rodless Cylinders For Automation Equipment
Publish Time: Author: Site Editor Visit: 33
1. Select the cylinder diameter size:
1. Determine the conditions
A: Determine the relevant load weight (load conditions include workpiece, fixture, guide rod, etc.)
B: Select the air pressure to be used (supply Rodless Cylinder compressed air pressure)
2. Select the rodless cylinder stroke
Confirm the moving distance of the workpiece, and select the small standard stroke that exceeds the moving distance of the workpiece as the rodless cylinder stroke (the standard stroke is determined according to the model and brand)
3. Select the rodless cylinder series
Use the purpose of use and the required cylinder diameter and stroke as conditions to select the most suitable series and model
4. Select the installation
Different series have different installation There are many installation methods for each series. The installation method should be selected according to the different uses of the rodless cylinder. The installation methods are: basic type, foot type, flange type, U-hook, and shaft ear type.
Five. Select the buffer
Choose the buffer method of the rodless cylinder according to the application needs. The buffer methods are: no buffer, rubber buffer, air buffer, and hydraulic shock absorber.
Six. Select the magnetic switch
The magnetic switch installed on the rodless cylinder is mainly used for position detection. (The built-in magnetic ring of the rodless cylinder is a prerequisite for using the magnetic switch)
Seven. Select the accessories of the rodless cylinder
According to the needs of the mechanical design, match the accessories of the piston rod end.
