Necessity Of Rodless Cylinder
Publish Time: Author: Site Editor Visit: 19
Necessity of Rodless Cylinder:
During the operation of rodless cylinder, the thrust of air pressure can be used to generate inertia, which will cause the piston to be unable to stop immediately when it moves back and forth, so it often hits the end covers at both ends of the rodless cylinder. In order to avoid this situation, an air buffer device should be configured, that is, its main function is to protect the end cover and prevent the end cover from being hit by the piston.
The rodless cylinder is equipped with a buffer valve, and the buffer capacity can be changed by adjusting the opening of the buffer valve. The buffer stroke should not be too long: because the buffer seal ring has a throttling effect, the piston action reacts slowly.
Scope of use of rodless cylinder: When the movement speed of the rodless cylinder is high, a rodless cylinder must be selected. Since there is no method to calculate the buffer effect, it needs to be adjusted according to the actual operation situation; the movement speed is high and the impact energy is also large, so the opening of the buffer throttle valve must be adjusted to obtain a better buffer effect.
